16
Points to consider during the electrical installation of SSM-6 Motors :
• Before the installation, make sure that the power to any other equipment connected to the
motor is completely turned off!
• Ensure that the electrical installation is carried out by experience people!
• Make the electrical connection only after carefully reviewing the motor ID!
• Make the electrical installation in compliance with legal regulations!
• Use screened cables for low voltages!
• Connecting the ground cable is vital!
• If the label on the casing is worn, refer to the label under the motor cover.
SSM-6 Servo motors are typically manufactured and offered for sale with a supply
voltage of 24 Volts AC/DC.
If the user desires to operate the equipment at a higher voltage, 110/220 VAC should be specified
when placing the order. See Figure-2, selection guide. If you should later decide to change the
supply voltage for any reason, you should contact our company.
The voltage input terminal of the SSM-6 motors operating at 24 Volts is Blue colored. See
Figure 8
The inputs of terminals 17 and 18 are live end (
L+)
and (
N-
) respectively.
If the SSM-6 motor operates at a higher voltage (110-220 VAC.), the terminal will be green. In
such cases, the connection shown in
Figure 9
should be applied. Terminal 17 is Phase (Live end)
and terminal 18 is Neutral.
Figure 8 :
24 Volt.AC/DC
Figure 9 :
110/220 Volt AC.
Electrical connection
Electrical connection
