14
B -
Introduction to the Electrical Connection Terminal
As standard, SSM-6 motors are provided with a voltage of 24 VAC/DC.
The supply voltage input is separate from the block clamps, as is seen in Figure 6.
In motors with 24 VAC/DC input, the voltage input terminal block is
BLUE
.
For 110-220 volt motors, the block is
GREEN
. The terminal block, containing 16 inputs, is a
spring-weighted double-deck connector.
Odd numbered terminals are on the upper row;
(1-3-5-7- 9-11-13-15)
Even numbered terminals are on the lower row;
(2-4-6-8-10-12-14-16)
Clamps no. 1 and 2 are
used for internal installation;
Please do not remove!
Control Inputs
Supply voltage input
Blue Colored Terminal
: 24 VAC/DC
Green Colored Terminal : 110-220 VAC
Figure 6 :
Electrical connection terminal
Clamp cable sockets 2.5 mm.
When making cable connections, first
open the connection socket by
inserting an appropriate screwdriver.
After placing the cable in the
terminal, remove the screwdriver.
The cable socket will close
automatically.
After completing the connection, check the cable has been properly
installed in the connection terminal!
WARNING
WARNING
