76
Chapter 6
1.
Select the way in which the router gets its time:
Get from Internet
,
Get from Managing
Device
,
Manually
.
2.
Select your local
Time Zone
.
3.
Enter the address or domain of the
NTP Server 1
or
NTP Server 2
.
4.
Click
SAVE
.
• To set up Daylight Saving Time:
1.
Tick the
Enable
box of
Daylight Saving Time
.
2.
Select the start time from the drop-down list in the
Start
fields.
3.
Select the end time from the drop-down list in the
End
fields.
4.
Click
SAVE
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to
the router successfully; otherwise, time-based functions will not take effect.
6. 6.
Reboot
Some settings of the router will take effect only after rebooting, and the system will
reboot automatically. You can also reboot the router to clear cache and enhance running
performance.
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2.
Go to
System
>
Reboot
, and you can restart your router.
• To reboot the router manually:
Click
REBOOT
, and wait a few minutes for the router to reboot.
