30
Chapter 5 Advanced Configuration
• Manual
- In this mode, the internet connection is controlled manually by
clicking the
Connect/Disconnect
button. This mode also supports the
Max
Idle Time
function as
On Demand
mode. Enter a maximum time (in minutes),
the internet connection can be inactive before it is terminated into the Max
Idle Time. The default value is 15 minutes. If you want the internet connection
remains active all the time, enter 0 (zero).
Note:
Sometimes the connection cannot be terminated although you have specified the
Max Idle Time
because some applications
are visiting the internet continually in the background.
5. 1. 3. MAC Clone
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Network
>
Internet
and locate the MAC Clone section.
3. Configure
Router MAC Address
and click
SAVE
.
• Use Default MAC Address
- Do not change the default MAC address of your
router in case the ISP does not bind the assigned IP address to the MAC
address.
• Clone Current Device MAC
- Select to copy the current MAC address of the
computer that is connected to the router, in case the ISP binds the assigned
IP address to the MAC address.
• Use Custom MAC Address
- Select if your ISP requires you to register the
MAC address and enter the correct MAC address in this field, in case the ISP
binds the assigned IP address to the specific MAC address.
Note:
•
You can only use the MAC Address Clone function for PCs on the LAN.
•
If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the connection is
re-established.
5. 1. 4. LAN
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
