Section 5 - Maintenance
Page 100
90-866938081 MAY 2009
4. Inspect the fluid level, which should be at the full‑cold mark.
b
c
a
40243
d
a -
Cap and dipstick
b -
Full‑cold mark
c -
Low‑cold mark
d -
Add
5. If the level is low, see
Filling
.
6. If the level is correct, insert the cap and dipstick into the neck of the reservoir. Push
down and turn the reservoir cap in the close direction.
b
c
a
40235
a -
Cap and dipstick
b -
Open direction
c -
Close direction
Filling
1. Using a clean, lint‑free cloth, wipe the dirt and debris away from the cap and exterior
of the steering actuator and trim fluid reservoir.
NOTE: The direction to rotate the cap to open or close is imprinted on the top of the cap.
Summary of Contents for Zeus 3000 Series
