Section 3 - Screen Overview and Operation
90-8M0120668
eng
MARCH 2016
Page 35
Smart Tow User‑Selected Data Area
The default Smart Tow screen allows you to select, set, and modify settings in the Smart Tow features. The launch graph dot is
animated when Smart Tow is active and performing a launch sequence. The dot will move along the launch path showing what
part of the launch sequence the system is performing.
LAUNCH
2
52188
Launch graph animated dot
Navigation
Smart Tow utilizes the user‑selected data area and the footer section of this area to allow you to adjust the settings. The
PAGES button moves the selection box through the fields. The footer section allows you to enable or disable Smart Tow, save,
or exit.
There are five selection tabs. The PAGES button will scroll through the profile selection, RPM/speed set point, and enable/
disable. When the selection tab is on enable, the arrow keys change the selection to save or exit (X).
•
The items located in the footer area require the enter button to be pressed to accept the selection.
•
The enter button is not required for the field above the footer area.
a -
Profile selection
b -
Set point value
c -
Enable
d -
Save
e -
Exit
The set‑point value will allow the operator to adjust the RPM or speed set‑point. These will default to 10 mph or 1700 RPM until
the operator quick saves the values.
•
Set‑point is the default selection when Smart Tow is active. The operator can adjust the RPM or speed by pressing the
arrow keys.
a -
Set‑point default selection
After the operator makes adjustments to the desired settings, pressing the PAGES button will move the cursor to the enable
selection in the footer area of the user‑selected data area.
•
Enable or disable turns the feature on or off. The persistent data RPM sweeps will be displayed as nonactive white
sweeps. The operator can modify all settings when the system is in the off state.
a. The Enable icon will be green when active
b
c
d
e
52192
a
a
52281
