Section 2 - Initial Screens and Setup Wizard
90-8M0120668
eng
MARCH 2016
Page 15
Select the OK button using the arrow buttons and the ENTER button. This will bring the operator back to the tanks selection
screen to complete the configuration of an additional tank.
60124
Repeat the process to assign tank type, capacity, and tank name for the remaining tanks on the vessel. When complete, select
the
Next
button to continue with the Setup wizard.
60125
Speed Setup
In the
Speed Setup
screen, there are three options for determining how VesselView will acquire speed information. If the
vessel is equipped with a GPS, the drop‑down menu will allow selection of available devices. If the vessel is equipped with a
pitot sensor, this option will be selected. If the vessel is equipped with a paddle wheel, then an option to select will drop down.
After the speed source has been selected, highlight
Next
and press ENTER to continue.
a -
Options for speed data
56810
a
