Indicators and Connecting
Front panel
The following figure illustrates the front panel of the Broadband Wireless Router (AP):
1. When link is established, the LED is
On
.
2. When the device is transferring data, the LED is
Blinking
.
Rear Panel
The following figure illustrates the rear panel of your Broadband Wireless Router (AP).
PWR:
Power Switch.
WAN:
This RJ-45 10 Base-T port connects to an Ethernet port of xDSL/ATU-R
broadband device.
LAN port L1/L2/L3/L4:
10/100 Base-TX, 4 port auto-sensing & crossover Ethernet
switching hub (LAN interface).
12VDC:
12V power connector.
RST:
Factory default reset switch.
To restore factory defaults, you do not need to power off the device. Push a small, stiff object
into the
RST
hole to press down the button. Keep pressing and wait fort 3 seconds (the DIAG
LED will illuminate about 3 seconds and turn off) to release the button. The device will
automatically restart. During restart,
do not
turn on/off the device and wait for the device to
boot up.
10