© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
Mercury Floor Machines, Inc.
New Equipment Warranty
Limited Warranty
Mercury Floor Machines, Inc. warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory implied
warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be
liable for any other damages, including but not limited to indirect or special consequential damages
arising out of or in connection with the furnishing, performance, use or inability to use the machine.
This remedy shall be the exclusive remedy of the purchaser. The warranty period is subject to the
conditions stated below.
5-Year Warranty on Motor and Chassis, 1-Year Service Labor
Mercury Floor Machines, Inc. warrants electric motors and chassis on all Mercury Floor Machines
to be free from defects in material and workmanship, under normal use and service for five (5)
years to the original purchaser. Parts replaced or repaired under this warranty are warranted for the
remainder of the original warranty period. Service labor charges are covered for one (1) year from
the date of purchase, when performed by a Mercury-authorized service provider. Freight charges
to and from this service provider will be covered for ninety (90) days from the purchase date.
After this ninety (90) day period, these freight charges will be paid by the equipment owner. Travel
expenses are not covered.
Wear Items on all Machines
Critical Wear Items - bearings, capacitors, clutches, pulleys, rectifiers, relays, switches, wheels,
tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.
Normal Wear Items - belts, brushes, bumpers carbon brushes, cords, finishes, squeegees, actuating
cables and gaskets are warranted for manufacturing defects for ninety (90) days from the purchase
date.
All warranties of motors and associated components will be voided: if the machine is used as
a floor sander; if the machines is serviced by anyone other than a Mercury-authorized service
provider; if the machine is mechanically modified; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from an authorized Mercury
Floor Machines, Inc. distributor, subject to proof of purchase. The machine registration card must
be completed and returned immediately at the time of purchase. If proof of purchase cannot be
identified, the warranty start date is ninety (90) days after the date of sale to an authorized Mercury
Floor Machines, Inc. distributor.
Mercury Floor Machines, Inc.
110 South Van Brunt Street
Englewood, NJ 07631
Phone: (201) 568-4606
Toll Free: (888) 568-4606
Fax: (201) 568-7962
www.mercuryfloormachines.com
Important Information and Safety Instructions
Register your Machine at mercuryfloormachines.com/registration.aspx
Serial No:
Dynamite Ul
tra D
.C
. Burnisher
Direct Drive
Safe & Easy to Use
Fully Adjustable
Balanced Design
Low Profile Drive
Quiet Motor
REGISTER
YOUR
MACHINE
ONLINE!
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
1750 RPM, 20” Apron
Model No.. DC-20-1750
