DTS DUAL CONSOLE REMOTE CONTROL WITH CAN TRACKPAD
90-889224 MAY 2006
Page 7 / 17
4. Troll button - Pressing the "TROLL" button activates troll control. The troll control
feature allows the boat operator to set the engine speed for slow speed cruising or
maneuvering. To activate, move the control handles into forward detent and press
the button. Use the - or + buttons to decrease or increase speed, up to a maximum
of 1000 RPM. If troll control is set at a desired speed and then shut off, the system
remembers the set speed and will return to that speed when re-engaged. To turn off
the troll control press the "TROLL" button, move the throttle to a different speed, or
shift the engine into neutral.
5. Transfer button - Pressing the "TRANSFER" button allows engine operation to be
transferred from a different helm. Refer to
Helm Transfer
.
6. Dock button - Pressing the "DOCK" button initiates docking mode. Docking mode
reduces throttle capacity to approximately 50% of normal throttle. To turn off docking
mode, shift the engine into neutral and press the "DOCK" button.
7. Throttle only button - Allows the boat operator to increase engine RPM for warm-up,
without shifting the engine into gear. To engage throttle only, move the control handle
into the neutral position. Press the throttle only button and move the control handle
ahead to the forward detent. The horn will sound once and the neutral light will start
flashing. The horn will sound twice when throttle only is engaged. Advance throttle to
increase engine RPM. To disengage, return control handle to neutral position and
press the throttle only button. Engine RPM is limited to prevent engine damage.
8. 1 lever button - Pressing the "1 LEVER" button initiates single lever mode. Single
lever mode enables the throttle and shift functions of both engines to be controlled by
the port control handle. To turn off single lever mode, shift the engine into neutral and
press the "1 LEVER" button.
9. Sync button - Pressing the "SYNC" button turns off or on the auto synchronization
feature. Refer to
Synchronizing Engines
.
N E
U T
R A
L
22133
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY
DOCK
TRANSFER
+
-
a
b
c
e
g
f
d
a -
Neutral LEDS
b -
Troll button
c -
Transfer button
d -
Dock button
e -
Throttle only
f -
1 lever button
g -
Sync button
10. Control handle tension adjustment screw - This screw can be adjusted to increase or
decrease the tension on the control handle (cover must be removed). This will help
prevent unwanted motion of the handle in rough water. Turn the screw clockwise to
increase tension and counterclockwise to decrease tension. Adjust to tension desired.