Section 2 - Getting to Know Your Power Package
90-8M0086943
eng
DECEMBER 2014
Page 19
Keep the Lanyard Stop Switch and Lanyard Cord in Good Operating Condition
Before each use, ensure that the lanyard stop switch works properly. Start the engine, and then stop it by pulling the lanyard
cord. If the engine does not stop, have the switch repaired before operating the boat.
Before each use, inspect the lanyard cord to ensure that it is in good working condition and that there are no breaks, cuts, or
wear to the cord. Check that the clips on the ends of the cord are in good condition. Replace any damaged or worn lanyard
cords.
Instrumentation
VesselView
There are several VesselView products available. VesselView will display all engine information, fault codes, vessel
information, basic navigation data, and system information. When an operating system error or failure occurs, VesselView
displays an alarm message.
VesselView may also be connected to other vessel systems such as GPS, generators, and chartplotters. This vessel
integration allows the operator to monitor and control a wide range of vessel systems from a single display.
Refer to the VesselView operator's manual for more information.
56038
VesselView 7
SmartCraft Digital Instruments
The SmartCraft instrument package augments the VesselView display. The instrument package may include:
•
Tachometer
•
Speedometer
•
Engine coolant temperature
•
Engine oil pressure
•
Battery voltage
•
Fuel consumption
Summary of Contents for 5.7 TowSport MPI
Page 8: ...Page iv 90 8M0086943 eng DECEMBER 2014...
Page 32: ...Section 2 Getting to Know Your Power Package Notes Page 24 90 8M0086943 eng DECEMBER 2014...
Page 42: ...Section 3 On The Water Notes Page 34 90 8M0086943 eng DECEMBER 2014...
Page 48: ...Section 4 Specifications Notes Page 40 90 8M0086943 eng DECEMBER 2014...
