Re
ad LCD / LED Messages
MESSAGE INTERPRETATION
CAP In
capturing
PC
Connected to Host PC
LED Operation
The 350K contain two red statuses LED.
1. The one in front indicate “Self Timer” counting timer.
2. The one in rear indicate as below:
LED Condition
Interpretation
Steady light
Power on / Ready to take a picture
Blinking
Busy /Not ready to capture
Flash is in charging
Getting Started
Install Operation Software
Your Camera was bundled with MGI application software as attached CD
when purchased. Just put CD into your host PC, Installation Menu will pump
up and goes Auto Run automatically for installation.
Install batteries
1.Pull down and lift up to open the battery door.
2.Install the 2xAAA alkaline batteries.
3.While batteries were correctly installed,
the camera will be automatically turn on
with a long beep tone.
And LCD will display
6