Important Notice
1. Do keep the first installed alkaline batteries at least 15 minutes in
camera for charging back up power. It’ll ensure you not lose captured
images during your changing batteries on next time within 90 seconds.
2. Be sure to turn off power before you change battery!!
3. This camera use sdram as images storage, which will consume battery
power with or without taking images. Would strongly suggest you do
download your captured images to computer when you finish capturing.
And do pay attention on camera’s battery status if you have captured
images in camera.
4. Do not sway camera until you hear two short beep tone to confirm your
capturing!!
5. When you are using flash to capture images, do not press shutter button
until led indication stop blinking!!
6. Flash can not work if camera is in low battery status. Suggest change
new alkaline battery to continue flash capturing.
7. Power will automatically shut down if camera being idle for 45
seconds.
8. “Delete all” function will delete “all” images and movie files at one
time. Be sure you want to clean up all information before you activate
this “delete all” function.
15