350.310UK User Manual
Installation:
1.
To install the CR2032 battery (supplied) into the transmitter, first insert a small flat bladed screwdriver into the slot
on the bottom of the unit, then gently twist to pop the back cover off (
Fig 1&2
). Remove the battery retaining strip
using a Philips screwdriver (
Fig 3
) then insert the battery ensuring the positive side is facing upwards (
Fig 4&5
).
Finally replace the retaining strip and back cover to complete the installation.
2.
Fix the transmitter on your door or doorframe securely using the self-adhesive pad provided (
Fig 6
), ensuring it
’
s in
an area that’s not
too open to the elements and as close to the receiver location as possible (max distance 200m).
3.
Plug the receiver into an available mains socket in your desired location and switch on. The receiver will now enter
learning mode and search for a unique frequency that won
’
t be interfered with by any other wireless devices in the
surrounding area.
4.
Select your desired melody by pressing the melody selection button repeatedly, there are 38 different ones to
choose from.
5.
You can also adjust the unit volume by repeatedly pressing the volume button on the side of the receiver. There are
3 levels to choose from, high, medium and low.
6.
Finally, press the transmitter to pair directly with the installed receiver. The transmission range is up to 200m, but
this distance can be significantly reduced by obstructions such as walls, doors, floors etc. If the receiver ringtone
can
’
t be heard, ensure it
’
s set up correctly and try again. In rare instances it may be necessary to move the receiver
to a new location if it cannot be paired correctly with the transmitter.
NOTE:
You must set your desired melody first before pairing with the transmitter. If you want to change the
melody after pairing has taken place, you must switch off the power on the receiver to clear the memory and
repeat from step 3 above.
If the receiver sounds at any time without anyone pressing the transmitter, there may be another wireless device
close by on the same frequency causing interference. In this instance, switch off the power on the receiver to clear
the memory and repeat from step 3 above.
Warning:
•
For reasons of electrical safety, this device must never be immersed in water, exposed to damp conditions or
excessive force.
•
Do not use this device if you find that it is damaged in any way.
•
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your warranty.
IP44
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or
commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
North Point Bus. Park, New Mallow Road, Cork, Ireland.
6
