Mercury 200 Optimax Page 98 Manual Download

Page: 98 / 155

MAINTENANCE

eng

2. Straighten the bent tabs on the propeller nut retainer.

45016

3. Place a block of wood between the gearcase and propeller

to hold the propeller and remove the propeller nut.

29592

4. Pull propeller straight off the shaft. If the propeller is seized

to the shaft and cannot be removed, have the propeller

removed by an authorized dealer.

5. To aid in future removal of the propeller, liberally coat the

propeller shaft splines with one of the following Mercury/

Quicksilver products:

Tube

Ref No.

Description

Where Used

Part No.

Anti-Corrosion

Grease

Propeller shaft splines

92-802867Q 1

2-4-C with

PTFE

Propeller shaft splines

92-802859A 1

Summary of Contents for 200 Optimax




























































































































































Search results

Summary of Contents for 200 Optimax

Reviews:

Related manuals for 200 Optimax

Brands by name

Popular brands

Mercury 200 Optimax, Manual

Search results

Summary of Contents for 200 Optimax

Reviews:

Related manuals for 200 Optimax

Brands by name

Popular brands