Mercury Systems ASURRE-Stor ADR256 Administrative Guidance Download Page 23 | Manualshive

Page: 23 / 23

Mercury Systems ASURRE-Stor ADR256 Administrative Guidance Download Page 23

Mercury Systems

ASURRE

-Stor

®

SSD

Administrative Guidance

Copyright 2020 Mercury Systems. May only be reproduced in its original form (without revision)

Rev. 1.5.1 February 2020 © 2020 Mercury Systems. All rights reserved

Mercury Systems, Inc. • (602) 437-1520 •

23

30

Change log

Revision

By

Description

Rev. 1.5.0.00

Bob Laz.

11/21/2016
Numerous changes to support operation with an AA profile. Changes are highlighted in yellow.

06/26/2017
Very minor change, fixed spelling error in Section 3. (TEO should have been TOE).
Changed document data on cover pager to 6/26/2017
Changed footer to reflect new date 6/26/2017

8/16/2017
Added references to the

SSD Secure Configuration Programmer’s Guide in section 16 and in the reference

documents list, Table 2. Changed dates in Footer to August 2017 and cover sheet to August 16, 2017.

8/23/17
Modified per Evaluation findings.

Rev. 1.5.1

Bob Laz.
Sabrina Piña

8/21/2019
Updates for re-certification. Document Dates, footers, and cPP versions updated.

11/25/2019
Updated Mercury logo, document dates, TOC, header, and footer.
Updated sections 7, 18, and 29 to describe the management of power-saving states.
Improved section 29 to better identify the secure configuration steps as requirements by bolding the shall text.
Added section 20 to describe how to change the User or Master ATA password after initial TOE configuration.

12/30/2019
Updated section 25 to describe changing firmware using a file provided by Mercury Systems and the ATA
DOWNLOAD MICROCODE command.

2/4/2020
Updated document dates and copyright on cover page and footer.
Updated section 29 to warn Crypto Officers about BIOS

manufacturer’s that capture and store ATA password

information for lost password recovery.
Improved the description of Mode 6 set up on page 7 to add clarity on how the BEV(KEK) is created and used.

«
...
21
22
23

Summary of Contents for ASURRE-Stor ADR256
























Reviews:

No comments