GENERAL INFORMATION
3
a -
Engine Model/
Horsepower:
___________________
_____
b -
Engine Serial
Number
1.
:
___________________
_____
c -
Transom Assembly
Serial Numer:
___________________
_____
d -
Sterndrive Serial
Number & Gear
Ratio
2.
:
___________________
_____
e -
Propeller Number &
Pitch:
____________________
_____
f -
Running Rotation
3.
:
____________________
_____
g -
Hull Identification
Number:
____________________
_____
h -
Boat Model & Length:
____________________
_____
The serial numbers are the manufacturer's keys to numerous
engineering details that apply to your Mercury Marine power
package. When contacting your authorized Mercury Marine dealer
about service, always specify model and serial numbers.
1. The engine serial number is printed on the center of the bell
housing and stamped into the front of the port cylinder head
along with the crankshaft number.
2. The gear ratio is stamped on the the bolt located next to the
serial number label.
3. The running rotation is stamped on the back of the strut.
Boater's Responsibilities
The operator (driver) is responsible for the correct and safe
operation of the boat and safety of its occupants and general
public. It is strongly recommended that each operator (driver) read
and understand this entire manual before operating the power
package.
Be sure at least one additional person on board is instructed in the
basics of starting and operating the power package, and boat
handling in case the driver is unable to operate the boat.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
