Mercury Floor Machines, Inc.
New Equipment Warranty
Limited Warranty
Mercury Floor Machines, Inc. warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory implied
warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be
liable for any other damages, including but not limited to indirect or special consequential damages
arising out of or in connection with the furnishing, performance, use or inability to use the machine.
This warranty shall be the exclusive remedy of the purchaser. The warranty period is subject to the
conditions stated below.
5 Years - Motor and Chassis, 1 Year - Service Labor
Mercury Floor Machines, Inc. warrants electric motors and chassis components on this machine
to be free from defects in material and workmanship, under normal use and service for five (5)
years to the original purchaser. Parts replaced or repaired under this warranty are warranted for
the remainder of the original warranty period. Service labor charges are covered for one (1) year
from the date of purchase, when performed by a Mercury Floor Machines, Inc.-authorized service
provider. Freight charges to and from this service provider will be covered for ninety (90) days
from the purchase date. After this ninety (90) day period, these freight charges will be paid by the
equipment owner. Travel expenses are not covered.
Wear Items on all Machines
Critical Wear Items - bearings, capacitors, clutches, pulleys, rectifiers, relays, switches, wheels,
tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.
Normal Wear Items - belts, brushes, bumpers, capacitors, carbon brushes, casters, clutches, cords,
finishes, gaskets, rectifiers, switches, squeegees, bearings, pulleys, relays, actuating cables, wheels,
and tires will be warranted for manufacturing defects for ninety (90) days from the purchase date.
All warranties of motors and associated components will be voided: if the machine is used as a
floor sander; if the machine is serviced by anyone other than a Mercury Floor Machines, Inc.-
authorized service provider; if the machine is mechanically modified; if a 2000 RPM model is
operating without the front wheel assembly attached; if a machine is operated when not operating
properly; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from Mercury Floor Machines,
Inc. subject to proof of purchase. The Machine Registration Card must be completed and returned
immediately at the time of purchase. If proof of purchase cannot be identified, the warranty start
date is ninety (90) days after the inventory stocking date at the Mercury Floor Machines, Inc.
warehouse.
© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
Mercury Floor Machines, Inc.
110 South Van Brunt Street
Englewood, NJ 07631
Phone: (201) 568-4606
Toll Free: (888) 568-4606
Fax: (201) 568-7962
www.mercuryfloormachines.com
Important Information and Safety Instructions
Register your Machine at mercuryfloormachines.com/registration.aspx
Serial No:
Ul
tra D
.C
. High-Speed BurnisheR
5 Apron Sizes
Fully Adjustable
Balanced Design
All Metal Chassis
Quiet Motor
Safe & Easy to Use
REGISTER
YOUR
MACHINE
ONLINE!
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
1.5 HP
1170, 1500 or 2000 RPM
19”, 20” and 21” Apron Sizes
