Wired
Connect wirelessly using the SSID (Network Name) printed on the product label at
the bottom of the router.
1. Turn off the modem, and remove
the backup battery if it has one.
2. Connect an Ethernet cable from the
modem to the WAN port on your router.
3. Power on the modem, wait about 2
minutes for it to restart.
4. Power on the router.
5. Verify that the hardware connection is
correct by checking the following LEDs.
Wireless
Note: If your Internet connection is through an Ethernet cable from the
wall instead of through a DSL/Cable/Satellite modem, connect the
Ethernet cable directly to the router’s WAN port.
1
Connect your computer to the router (Wired or Wireless).
Power
On
WAN
On/Flashing
150Mbps Wireless N Router
MW155R
Quick
Installation Guide
Connect the
Hardware
1
Conf igure the
Router
2
POWER
WPS/
RESET
WAN
LAN
POWER
RESET
WAN
LAN
Internet
Router
Modem
POWER
RESET
WAN
LAN
Power Adapter
For more information, please visit our website:
http://www.mercusys.com
7107500055 REV1.0.0
