Page 3 of 4
Fig. 1 View of the interior of the housing of the RPO-1 pushbutton.
Along the top edge of the board, there are terminal strips used to
connect leads. Connection diagram is shown in Fig. 3.
1, 2
- LINE RESET 1
3, 4
- LINE RESET 2
5
- LED ALARM cathode
6
- LED ALARM anode
7, 8
- LINE RPO 1
9, 10 - LINE RPO 2
11
- LED DEFECT cathode
12
- LED DEFECT anode
13
- LED OK cathode
14
- LED OK anode
Fig. 2 Electric diagram of the RPO-1 pushbutton.
Technical specification
Item
Value
Compatible control units
mcr 9705; mcr 0204
Alarm pushbutton parameters
24V=, max. 100 mA
Working temperature range
-
10°C + 55°C
Protection level for housing
IP 3X
Dimensions (H x W x D)
135 x 135 x 33 mm
Range of diameters leads to be connected
0.5 ÷ 0.75 mm²
Required number of wires in the connected lead 7
Release mode
Indirect
Type
I
(operation and signalisation)
Climate class
I
1
2
