Mercedes-Benz Zetros 2020, Operating Instructions Manual

Page: 81 / 212

Events menu window
You can display stored malfunctions and mes-
sages in the
Events
menu. If you have recti-
fied the cause of the malfunction/message,
the on-board computer no longer displays the
event.
X
Use the
u
or
t
button to scroll to
ã
monitoring info.
X Use the
r
or
s
button to scroll to the
Events menu window.
The menu window shows, for example, the
number of events.
X
To display an event: press
9
.
X
To show further events: press the
r
or
s
button.
Diagnostics menu window
Diagnostics data contains information with
which you can assist the workshop staff during
fault diagnosis, e.g. by remote diagnosis. The
Diagnosis menu window contains, for exam-
ple, a list of all control units (systems) instal-
led in the vehicle.
You can obtain further information from any
Mercedes-Benz Service Centre.
X Use the
u
or
t
button to scroll to
ã
monitoring info.
X
Use the
r
or
s
button to scroll to the
Diagnosis
menu window.
X
To display diagnostics data: press
9
.
The input window shows a list of all control
unit system abbreviations.
X Select the desired control unit using the
r
or
s
button.
X
Display further details on the control unit by
pressing the
u
button.
Settings menu
Menu window menu
If you change the settings in the
Menu
menu
window, the changes affect the display of the
menu window.
X Use the
u
or
t
button to scroll to
ä
settings.
X
To set the units of measurement: press
the
9
button.
The input window displays a list of possible
settings:
R
clock mode in
24h
or
12h
R
speed in km/h or mph
R
distance in
km
or
mi
R
liquid units in
litres
,
UK gal
or
US gal
R
temperature units in °C or °F
R
average fuel consumption in
l/100 km
,
km/l
or
mpg
R
pressure units in bar/kpa or psi
R
weight units in
t
,
tn
or
l.tn
X Select the desired menu bar with the
r
or
s
button.
X
Change the setting with the
u
or
t
button.
Lighting menu window
In the lighting menu window you can:
R
adjust the headlamp range of the dipped-
beam headlamps
R
adjust the brightness of the instrument clus-
ter lighting and audio display, when it is dark
and the lights are switched on
R
switch the automatic control of the interior
lighting on/off
X Use the
u
or
t
button to scroll to
ä
settings.
X
Use the
r
or
s
button to scroll to the
Lighting
menu window.
X
Press the
9
button.
The menu window shows the Headl.
range ctrl
. input window.
X
To adjust the headlamp range of the
dipped-beam headlamps: change the set-
ting using the
u
or
t
button.
When the vehicle is laden, the road should
be illuminated from 40 m to 100 m and the
dipped-beam headlamps must not dazzle
oncoming vehicles. If the vehicle is unladen,
select position
u
.
X
To set the instrument cluster lighting:
use the
r
or
s
button to select
Instrument panel .
You can only adjust the brightness of the
instrument cluster and the switches if night
mode has been detected and the lighting is
On-board computer
79
On-board computer and displays
Z