Mercedes-Benz Zetros 2020, Operating Instructions Manual

Page: 44 / 212

Centre seat
X Observe the notes on seats (
Y
page 40).
X
To adjust the head restraint: pull head
restraint
:
up or push it down to the
desired height.
X To remove the head restraint: press and
hold release catch
;
.
X
Pull head restraint
:
up and out with a sin-
gle movement.
X To adjust the backrest: relieve the back-
rest of any weight.
X Pull lever
=
up and hold it.
X
Apply weight to or relieve the seat backrest
of any weight in order to move it into the
desired position.
X Release lever
=
.
X
To fold the seat backrest forwards: pull
locking bar
?
out of the bracket and fold it
upwards.
X Pull lever
=
up and hold it.
X
Fold the seat backrest fully forwards and
press on locking bar
?
.
The rod end of locking bar
?
engages in
joint socket
A
of the seat backrest, stabil-
ising the surface.
X
To fold the seat backrest up: push lever
B
as far as it will go.
The rod end of locking bar
?
is released
from joint socket
A
. The seat backrest can
be folded up.
Bunk
Important safety notes
G
DANGER
If the doors, the roof hatch and the windows
are closed, there is no fresh air circulating in
the cab. The concentration of CO/CO
2
therefore increases and you could suffocate.
There is a risk of fatal injuries.
Ensure that there is a supply of fresh air.
G
WARNING
A vehicle occupant on the berth while the
vehicle is in motion cannot be restrained.
There is a risk of injury, possibly even fatal.
Only use the berth when the vehicle is sta-
tionary.
Ensure that there is a sufficient supply of fresh
air in the cab when you are alone or with sev-
42
Bunk
Driver's workstation