Mercedes-Benz Zetros 2020, Operating Instructions Manual

Page: 204 / 212

Useful information
These Operating Instructions describe all the
models and standard and optional equipment
of your vehicle that were available at the time
of going to print. Country-specific differences
are possible. Bear in mind that your vehicle
may not be equipped with all the functions
described. This also applies to safety-relevant
systems and functions.
Read the information on qualified specialist
workshops (
Y
page 23).
Vehicle identification plate/axle
loads
Vehicle identification plate and vehi-
cle identification number (VIN)
As long as no other national regulations apply,
vehicle identification plate
:
is located in the
door frame on the co-driver's side.
Vehicle identification number (VIN)
;
is stam-
ped on the longitudinal frame member in the
right wheel housing.
Information on the vehicle identifica-
tion plate
Example: vehicle identification plate
:
Vehicle manufacturer
;
EU general operating permit number (only
in certain countries)
=
Vehicle identification number (VIN)
?
Permissible gross vehicle weight (kg)
Permissible vehicle combination gross
weight (kg)
A
Permissible axle loads (kg)
B
Flue gas coefficient
C
Axle reduction ratio
D
Basic headlamp setting
E
Type of vehicle (vehicle model designation)
Vehicle model designation
Example: vehicle model designation
33 42
33 Permissible gross weight in
metric tonnes
42 Engine power output in bhp
(= x 10)
202
Vehicle identification plate/axle loads
Technical data