#
Adjust the seat to the desired position.
#
Press memory button M together with one of
the preset position buttons 1, 2 or 3.
An acoustic signal sounds. The settings are
stored.
#
To call up: press and hold memory position
button 1, 2 or 3 until the front seat is in the
stored position.
&
WARNING Risk of injury or fatal injuries if
the driver's seat and front passenger seat
are not engaged
In this situation, the restraint systems cannot
perform their intended protective function.
#
Engage the driver's seat and front
passenger seat in the direction of travel
before you start the vehicle.
&
WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
If you adjust the driver's seat, the head
restraint, the steering wheel or the mirror
while the vehicle is in motion
R
If you fasten your seat belt while the vehi-
cle is in motion
#
Before starting the vehicle: in particular,
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
You can rotate the driver's and front passenger
seats by 50° and 180°. The seats engage both in
and opposite to the direction of travel as well as at
50° towards the exit.
#
Ensure that the parking brake is applied and
the brake lever is down as far as it will go
(
/
page 139).
#
When rotating the seat, open the respective
front door in order to avoid a collision with the
door trim.
#
Adjust the steering wheel in such a way that
there is sufficient clearance to rotate and
adjust the driver's seat (
/
page 78).
#
Slide the front passenger seat forward before
rotating it (
/
page 66).
#
To rotate the seat: push lever
1
towards the
door and rotate the seat slightly inwards.
The turning device will be unlocked.
#
Release lever
1
again.
#
Rotate the seat outwards or inwards into the
required position.
72
Seats and stowage
