Partition from the cab
Partition from the cargo compartment
#
To open: turn the key to the left
3
from the
cab or push the lever to the right
3
from the
cargo compartment.
The sliding door is unlocked.
#
Push the sliding door as far as it will go to the
right
2
from the cab or to the left
1
from
the cargo compartment.
#
To close: push the sliding door to the left
1
from the cab or to the right
2
from the cargo
compartment until it engages.
You can lock the sliding door from the cab with
the key.
Function of the electrical step
Your vehicle's sliding door may be equipped with
an electrical step.
Electrical step
1
automatically extends when the
sliding door opens, and retracts after the sliding
door closes. Electrical step
1
is equipped with
object recognition at the front. If the step meets
an object while extending, it stops. Once you have
removed the object, you must first close the sliding
door and then open it again so that the step
extends completely.
If the electrical step prevents loading, you can
block it via object recognition when the sliding
door opens. The electrical step then remains
retracted and a fork-lift truck or another lifting
vehicle can move closer to the cargo compart-
ment.
%
The
Step Not Extended See Operator's Man-
ual
or
Sliding Step Not Extended Malfunction
See
+
message appears on the instrument
cluster display.
When the vehicle is switched off, a warning
tone will sound if object recognition is
blocked. The tone lasts for two minutes.
When the vehicle is switched on, the warning
tone will sound continuously.
Vehicles with an instrument cluster (color): if the
instrument cluster display shows the
Step Not
Retracted See Operator's Manual
or
Step Not
Extended See Operator's Manual
message and a
warning tone sounds, electrical step
1
is mal-
functioning (
/
page 322, 321).
If electrical step
1
is malfunctioning, the step
may not extend or retract, or do so only partially.
After a malfunction occurs, you must retract and
59
