Mercedes-Benz Sprinter Operating Instructions Manual Download Page 331

Page: 331 / 354

Driving systems

Warning/indicator lamp

Possible causes/consequences and

Solutions

Warning lamp for distance

warning function

*The red distance warning lamp lights up while you are driving and a

warning tone sounds.

You are approaching an obstacle at too high a speed.

Be ready to apply the brakes immediately.

Increase the distance.

Vehicle

Warning/indicator lamp

Possible causes/consequences and

Solutions

Electric power steering

warning lamp (red)

*The red power steering warning lamp lights up while the vehicle is

switched on.

The power steering assistance or the steering itself is malfunctioning.

WARNING Risk of accident due to impaired steering ability

If the steering no longer functions as intended, the operational

safety of the vehicle is at risk.

Consult a qualified specialist workshop.

Note the messages on the instrument cluster display.

Engine

Warning/indicator lamp

Possible causes/consequences and

Solutions

Coolant warning lamp

*The red coolant warning lamp lights up while the vehicle is on.

Possible causes:

Temperature sensor malfunctioning

Coolant level too low

Air supply to the radiator obstructed

Radiator fan faulty

If a warning tone also sounds, the coolant has exceeded the tempera-

ture of 248°F (120°C).

WARNING Risk of burns when opening the hood

If you open the hood in the event of an overheated engine or fire in
the engine compartment, the following situations may occur:

You may come into contact with hot gases.

You may come into contact with other escaping hot operating

fluids.

Before opening the hood, allow the engine to cool down.

In the event of a fire in the engine compartment, keep the

hood closed and call the fire service.

Display messages and warning and indicator lamps 329

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands