Home
/
Mercedes-Benz
/
Sprinter
/
Operating Instructions Manual

Mercedes-Benz Sprinter, Operating Instructions Manual, Page: 328 / 354

Share

Page: 328 / 354

Mercedes-Benz Sprinter Operating Instructions Manual Download Page 328

Warning/indicator lamp

Possible causes/consequences and

M

Solutions

&

WARNING Risk of an accident if the EBD (electronic brake force

distribution) malfunctions

If the EBD malfunctions, the wheels may lock during braking.
The braking characteristics may be impaired.
The braking distance can increase in emergency situations.

#

Stop in a safe location immediately. Do not continue driving.

#

Consult a qualified specialist workshop.

&

WARNING Risk of an accident due to low brake fluid level

If the brake fluid level is too low, the braking effect and the braking

characteristics may be impaired.

#

Pull over and stop the vehicle safely as soon as possible, pay-

ing attention to road and traffic conditions. Do not continue

driving under any circumstances.

#

Consult a qualified specialist workshop.

#

Do not add brake fluid.

#

Stop the vehicle immediately in accordance with the traffic condi-

tions. Do not continue driving!

#

Consult a qualified specialist workshop.

J

and

$

Brake warning lamp (red)

(USA)

*Only in the USA: The brake system red warning lamp lights up while the

engine is on.
Possible cause:

R

The brakepads have reached their wear limit.

&

WARNING Risk of accident due to restricted braking power

When the brake pads have reached their wear limit, the braking

power may be restricted.

#

Drive on carefully.

#

Have the brake system checked immediately at a qualified

specialist workshop.

#

Drive on carefully.

#

Consult a qualified specialist workshop immediately.

6

Restraint system warning

lamp

*The red restraint system warning lamp is on while the vehicle is

switched on.

The restraint system is malfunctioning.

&

WARNING Risk of injury due to malfunctions in the restraint

system

Components in the restraint system may be activated unintention-

ally or not deploy as planned in an accident.

#

Have the restraint system checked and repaired immediately

at a qualified specialist workshop.

326 Display messages and warning and indicator lamps

«
...
326
327
328
329
330
...
»

Summary of Contents for Sprinter



































































































































































































































































































































































Reviews:

No comments