Mercedes-Benz Sprinter Operating Instructions Manual Download Page 326

Page: 326 / 354

Warning/indicator lamp

Possible causes/consequences and

Solutions

and

Red electric parking brake

applied indicator lamp

(USA) flashes

Red electric parking brake

applied indicator lamp

(Canada) flashes

Electric parking brake

malfunctioning yellow

indicator lamp lights up

*Vehicles with electric parking brake: the red electric parking brake indi-

cator lamp flashes. The yellow electric parking brake indicator lamp

lights up.
Meaning of the indicator lamps:

The red electric parking brake indicator lamp flashes: the activation

status of the electric parking brake is unknown.

The yellow electric parking brake indicator lamp lights up: the elec-

tric parking brake is malfunctioning.

Note the messages on the instrument cluster.

Switch the vehicle off and on.

Engage and release the electric parking brake using the switch

while depressing the brake pedal.

If the fault message persists, park the vehicle on level ground and

secure it against rolling away (

page 141).

Consult a qualified specialist workshop.

Do not drive the vehicle when the red indicator lamp is flashing, as

the brake system may overheat.

and

Red electric parking brake

applied indicator lamp

(USA) lights up

Red electric parking brake

applied indicator lamp

(Canada) lights up

The electric parking brake

malfunctioning yellow

indicator lamp does not

light up

*Vehicles with electric parking brake: the electric parking brake red indi-

cator lamp lights up. The electric parking brake yellow indicator lamp

does not light up.
Meaning of the indicator lamps:

The electric parking brake red indicator lamp lights up: the electric

parking brake has been applied.

The electric parking brake yellow indicator lamp does not light up:

there are no faults with the electric parking brake.

Do not drive the vehicle if the electric parking brake has been

applied.

324 Display messages and warning and indicator lamps

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Mercedes-Benz Sprinter, Operating Instructions Manual, Page: 326 / 354

Search results

Summary of Contents for Sprinter

Reviews: