manualshive.com logo in svg

Mercedes-Benz Sprinter, Operating Instructions Manual, Page: 304 / 354

Share
Download
Mercedes-Benz Sprinter Operating Instructions Manual Download Page 304

Safety systems

Display messages

Possible causes/consequences and 

M

 Solutions

6

Left Side Curtain Airbag 

Malfunction Service 
Required

 (example)

* The respective window curtain airbag is malfunctioning (

/

 page 36).

&

WARNING Risk of injury or fatal injury due to malfunctions in

the window airbag

If the window airbag is malfunctioning, it might be triggered unin-

tentionally or might not be triggered at all in the event of an acci-

dent with high deceleration.

#

Have the window airbag checked and repaired immediately

at a qualified specialist workshop.

#

Consult a qualified specialist workshop immediately.

6

Front Left Malfunction 
Service Required

 (exam-

ple)

* The respective restraint system is malfunctioning (

/

 page 32).

&

WARNING Risk of injury due to malfunctions in the restraint

system

Components in the restraint system may be activated unintention-

ally or not deploy as planned in an accident.

#

Have the restraint system checked and repaired immediately

at a qualified specialist workshop.

Recognition of a restraint system malfunction:

R

The 

6

 restraint system warning lamp does not light up when

the vehicle is switched on.

R

The 

6

 restraint system warning lamp lights up continuously or

repeatedly during a journey.

#

Consult a qualified specialist workshop immediately.

6

SRS Malfunction Service 

Required

* The restraint system is malfunctioning (

/

 page 32).

&

WARNING Risk of injury due to malfunctions in the restraint

system

Components in the restraint system may be activated unintention-

ally or not deploy as planned in an accident.

#

Have the restraint system checked and repaired immediately

at a qualified specialist workshop.

Recognition of a restraint system malfunction:

R

The 

6

 restraint system warning lamp does not light up when

the vehicle is switched on.

R

The 

6

 restraint system warning lamp lights up continuously or

repeatedly during a journey.

#

Consult a qualified specialist workshop immediately.

302 Display messages and warning and indicator lamps

Summary of Contents for Sprinter



































































































































































































































































































































































Reviews:

No comments