The following displays are available on the media
menu:
R
Media source selection list
R
Current playback
#
Select and confirm the media source.
#
Select and confirm the required playback.
%
This is how to select a station when TV is the
media source.
Dialing a telephone number using the on-board
computer
&
WARNING Risk of distraction from infor-
mation systems and communications
equipment
If you operate information and communication
equipment integrated in the vehicle when driv-
ing, you will be distracted from the traffic situa-
tion. This could also cause you to lose control
of the vehicle.
#
Only operate this equipment when the
traffic situation permits.
#
If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
When using the phone, you must observe the legal
requirements for the country in which you are cur-
rently driving.
Requirements:
R
The mobile phone is connected to the multime-
dia system.
On-board computer:
4
Phone
Select one of the following options:
R
Previous calls
R
Phone book
R
Call status
Vehicles with MBUX multimedia system: the most
recent telephone calls (dialed numbers, accepted
and missed calls) are displayed on the
Phone
menu.
#
Select and confirm a telephone number.
If only one telephone number has been saved
for the entry: the telephone number is dialed.
#
If several telephone numbers have been saved
for the entry: select and confirm a telephone
number.
The telephone number is dialed.
Instead of the selected telephone numbers, the fol-
lowing displays may appear:
R
Please Wait
: The application is currently start-
ing. If no Bluetooth
®
connection to the mobile
phone is established, the menu for authorizing
and connecting a mobile phone will be dis-
played in the multimedia system
(
/
page 195).
R
Updating Data…
: The call list is being updated.
R
Importing Contacts
: The mobile phone's con-
tacts, or a memory medium's contacts are
being imported.
Accepting/rejecting a call
When you are called, the
Incoming Call
message
appears on the display.
#
Press
6
to accept the call or
~
to reject
it.
You can also accept or reject the call using the
6
or
~
buttons on the steering wheel.
Calling up settings on the on-board computer
On-board computer:
4
Settings
The following entries can be set in the Settings
menu:
R
Light
-
Instr. Clust. Light.
Setting
R
Vehicle
-
Rain Sensor
Switching on/off
R
Heating
Setting
R
Display and Operation
-
Switching permanent
Display Additive
(DEF)
on and off
#
Select an entry and confirm the selection.
#
Make the necessary changes.
Instrument cluster and on-board computer 179
