Mercedes-Benz Sprinter Operating Instructions Manual Download Page 143

Page: 143 / 354

In addition, the children could also set the
vehicle in motion by, for example:

releasing the parking brake.

changing the gearbox position.

starting the vehicle.

Never leave children unattended in the

vehicle.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Keep the key out of reach of children.

Observe the note on transporting animals in the

vehicle (

page 45).

For the automatic functions to work correctly, the

driver must be seated in the correct seat position

(

page 66).

The function of the electric parking brake is

dependent on the on-board electrical system volt-

age. If the on-board electrical system voltage is

low or there is a malfunction in the system, the

electric parking brake may not be able to be

applied. In this case, the yellow

indicator

lamp lights up.
In this case, park the vehicle in the following way:

Park the vehicle on level ground and secure it

to prevent it from rolling away.

Vehicles with automatic transmission: shift the

transmission to position

The electric parking brake is only actually

applied when the red

and

(USA)

indicator lamps or the red

(Canada) indi-

cator lamps light up continuously.

It may not be possible to release a parking brake if

the on-board electrical system voltage is low or if

there is a malfunction in the system. Inform a

qualified specialist workshop.
When the vehicle is not switched on, the electric

parking brake carries out a function test at regular

intervals. Noises are normal in this process.

▌

Function of the electric parking brake

Vehicles with automatic transmission:
The electric parking brake is automatically applied

when the transmission is in position

In addition, at least one of the following conditions
must be fulfilled:

The vehicle has not been started

The driver is not sitting in the driver's seat

The belt buckle is undone

The electric parking brake is also automatically

applied if Active Distance Assist DISTRONIC has

brought the vehicle to a standstill.
The electric parking brake is also automatically
applied when the transmission is not in position P,
but the following situations occur:

There is a system malfunction

The power supply is insufficient

The vehicle is stationary for a long time

The red

and

(USA) or

(Canada)

indicator lamps in the instrument cluster light up.

The electric parking brake is only actually applied

when the red

and

(USA) or

(Can-

ada) indicator lamps light up continuously.

To prevent the electric parking brake from

applying automatically, pull switch

▌

Releasing the electric parking brake automati-

cally

Vehicles with automatic transmission:
The electric parking brake of your vehicle is
released when all of the following conditions are
fulfilled:

The driver is sitting in the driver's seat.

The driver is belted.

The vehicle has been started.

The transmission is in position

and

you depress the accelerator.
or

Driving and parking 141

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Mercedes-Benz Sprinter, Operating Instructions Manual, Page: 143 / 354

Search results

Summary of Contents for Sprinter

Reviews: