Control system
122
following message, or if available, the caller
ID (number or name):
X
Press button
s
.
You have answered the call.
Ending a call or rejecting an incoming
call
X
Press button
t
.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book. You can add new numbers to the
phone book with the telephone, see separate
operating instructions.
X
Press button
ÿ
or
è
repeatedly until
the message
TEL
appears in the left
multifunction display.
X
Press button
j
or
k
repeatedly until
the desired name appears in the right
multifunction display.
If you press and hold button
j
or
k
for longer than 1 second, the system
scrolls rapidly through the list of names
until you release the button again.
The stored names are displayed in
ascending or descending alphabetical
order.
X
Press button
s
.
The control system dials the selected
phone number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party (if stored in
your phone book) you are calling will
appear in the multifunction display.
The control system stores the dialed
number in the redial memory.
or
X
Press button
t
if you do not want to
make the call.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
X
Press button
ÿ
or
è
repeatedly until
the message
TEL
appears in the left
multifunction display.
X
Press button
s
.
The first number in the redial memory
appears in the right multifunction display.
X
Press button
j
or
k
repeatedly until
the desired number or name appears in the
multifunction display.
X
Press button
s
.
The control system dials the selected
phone number.
Controls in detail
230_AKB; 1; 42, en-US
d2ureepe,
Version: 2.11.7.1
2008-11-27T15:37:19+01:00 - Seite 122
