X
Turn the light switch to
$
or
Ã
.
or
X
If the rear fog lamp is switched on: press
the light switch in to the stop.
X
To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position
2 or start the engine.
X
Turn the light switch to
L
.
The
L
indicator lamp in the instrument
cluster lights up.
X
To switch off the low-beam
headlamps: turn the light switch to
$
.
Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.
X
Turn the light switch to
$
or
Ã
.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
activated, the
T
indicator lamp on the
light switch and the
L
indicator lamp in
the instrument cluster light up.
If the light switch is set to
$
or
Ã
, you
cannot activate the high-beam headlamps.
Turn the light switch to
L
when driving at
night. You can switch on the high-beam
headlamps in this position.
When the engine is running and the vehicle is
stationary: if you move the selector lever from
a driving position to
N or P, the low-beam
headlamps go out after three minutes.
When the engine is running and the vehicle is
stationary: if you turn the light switch
to
T
, the parking lamps and the low-beam
headlamps are switched on.
Daytime running lamps in the USA
In the USA, the daytime running lamps are
deactivated upon delivery from the factory.
X
To activate the daytime running
lamps: activate the daytime running lamps
function in the on-board computer
(
X
Turn the light switch to
$
or
Ã
.
With the engine running: the low-beam
headlamps are switched on. The
T
indicator lamp on the light switch and the
L
indicator lamp in the instrument
cluster light up.
It is only possible to activate the high-beam
headlamps if the brightness of the ambient
light is at a low level.
However, the high-beam flasher can always
be used.
If the engine is running and you turn the light
switch to
T
or
L
, the manual settings
take precedence over the daytime running
lamps.
X
To switch on automatic headlamp
mode: turn the light switch to
Ã
.
SmartKey in position
1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
With the engine running: depending on the
brightness of the ambient light, the daytime
running lamps
10
or the low-beam
headlamps are switched on or off
automatically.
When the low-beam headlamps are
switched on, the
L
indicator lamp in the
instrument cluster lights up.
If the light switch is set to
Ã
, the low-beam
headlamps will not come on automatically if
it is foggy. This could endanger you and
10
Only if daytime running lamps have been activated via the on-board computer.
Exterior lighting
115
Lights and windshield wipers
Z
Summary of Contents for R 350 2012
