Mercedes-Benz Body & Equipment Guideline for Metris - BM 447, Version November 27, 2015.
!
Please observe the revision notes compared to 09/18/2015 ! Only print out complete sections of the current version!
94
8.3 Motorhomes
8 Design of bodies
8.3
Motorhomes
Prior to conversion into a motorhome, please note the
following:
•
Legal requirements, including but not limited to not
exceeding the maximum unloaded vehicle weight.
•
Minimum requirement for interior design and equip-
ment for motorhomes
•
Permissible center of gravity position and axle loads
Particular attention must be paid to the following sec-
tions of the Body & Equipment Guideline:
•
4.3 “Dimensions and weights” (
•
7 “Modifications to the basic vehicle”
(
•
7.2.4 “Fenders and wheel wells” (
•
•
9.7 “Driver assistance systems” (
The interior equipment must be designed in such a
way that there are no sharp edges or corners (accident
prevention).
Equipment must be made of flame-resistant materials
and be fitted securely. Unimpeded access to the seats
must be ensured. Do not install protruding parts, edges
or corners which could cause injury in the area of the
seats.
