Mercedes-Benz GLS 2023, Operator'S Manual

Page: 154 / 538

Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow 1 .
When the high beam is activated, the indicator
lamp for low beam
L
will be deactivated
and replaced by the indicator lamp for high
beam
K
.
Switching off high beam
#
Push the combination switch in the direction
of arrow 1 or pull it in the direction of arrow
3 .
Headlamp flashing
#
Pull the combination switch in the direction of
arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combina-
tion switch beyond the point of resistance in
the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Activating/deactivating the hazard warning lights
#
Press button 1 .
The hazard warning lights will switch on automati-
cally if:
R
the air bag was deployed.
When the turn signal indicator is activated, the
hazard warning lights will be interrupted.
152 Light and visibility