Mercedes-Benz GLE 350 4MATIC 2020, Operator'S Manual

Page: 536 / 650

#
Observe the instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
Have the coolant regularly replaced at a qualified
specialist workshop.
The proportion of corrosion inhibitor/antifreeze
concentrate in the engine cooling system should
be:
R
A minimum of 50% (antifreeze protection
down to approximately -35 °F (-37 °C))
R
A maximum of 55% (antifreeze protection
down to -49 °F (-45 °C))
Coolant capacity
Capacity
Model Capacity
GLE 350 4MATIC 13.7 US qt
(13.0 liters)
GLE 450 4MATIC 20.0 US qt
(18.9 liters)
GLE 580 4MATIC 16.6 US qt
(15.7 liters)
Notes on windshield washer fluid
Observe the notes on operating fluids
(
/
page 529).
& WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Windshield washer concentrate is highly
flammable. It could ignite if it comes into
contact with hot engine component parts or
the exhaust system.
#
Make sure that no windshield washer
concentrate spills out next to the filler
opening.
* NOTE Damage to the exterior lighting
due to unsuitable windshield washer fluid
Unsuitable windshield washer fluid may dam‐
age the plastic surface of the exterior light‐
ing.
#
Only use windshield washer fluid which
is also suitable for use on plastic surfa‐
ces, e.g. MB SummerFit or MB Winter‐
Fit.
* NOTE Blocked spray nozzles caused by
mixing windshield washer fluids
#
Do not mix MB SummerFit and MB Win‐
terFit with other windshield washer flu‐
ids.
Do not use distilled or de-ionized water as the fill
level sensor may be triggered erroneously.
534 Technical data