Mercedes-Benz EQV 2021 Owner'S Manual Download Page 81

Page: 81 / 300

Always fold back a rear bench seat that

has been folded forward before you start

driving.

Ensure that the rear bench seat is

engaged.

Folding the EASY-ENTRY section forwards/back
If you fold the EASY-ENTRY section of the rear

bench seat forwards, it is easier for you to get in

and out of the vehicle.

Rear bench seat with EASY-ENTRY feature (exam-

ple: comfort rear bench seat)

Grab handle

EASY-ENTRY release handle

Release handle for front seat legs

Pull EASY-ENTRY release handle

upwards.

Fold the EASY-ENTRY section forwards with the

aid of grab handle

To fold the EASY-ENTRY section back: fold the

EASY-ENTRY section back until it engages in

the seat anchorages. The indicator tab will no

longer be visible.

The EASY-ENTRY section is correctly engaged

when the seat leg engages audibly and the

indicator tab is no longer visible and is fully

retracted into the seat leg.

Removing the EASY-ENTRY section

Vehicles with comfort rear bench seat: fold the

seat backrest forward.

Pull EASY-ENTRY release handle

upwards.

Fold the EASY-ENTRY section forwards with the

aid of grab handle

Pull release handle

for the front seat legs

upwards.

Fold the EASY-ENTRY section further forwards.

Lift the EASY-ENTRY section up and out of the

anchorage.

Installing the EASY-ENTRY section

Place and engage the front seat leg of the

EASY-ENTRY section on the seat anchorages.

Fold the EASY-ENTRY section back.

The rear seat leg of the EASY-ENTRY section

will engage audibly. The indicator tab on the

seat leg will no longer be visible.

The EASY-ENTRY section is correctly engaged

when the seat leg engages audibly and the

indicator tab is no longer visible and is fully

retracted into the seat leg.

Vehicles with comfort rear bench seat: fold the

seat backrest back to the seat position.

▌

Adjusting the seat backrest (comfort rear bench

seat)

Only the seat backrests of a comfort rear bench

seat can be adjusted.

Pull release handle

for the seat backrest

upwards and hold it in position.

Move the seat backrest to the desired position.

Let go of release handle

for the seat back-

rest and move the seat backrest slightly.

The seat backrest will engage in position.

▌

Moving the rear bench seat

WARNING Risk of becoming trapped when

adjusting the rear bench seat

When adjusting a rear bench seat, you or

another vehicle occupant could become trap-

ped by the guide rail of the rear bench seat,

forexample.

Make sure that no one has any part of

their body within the sweep of the rear

bench seat when adjusting it.

Seats and stowage

T447 0414 02

Summary of Contents for EQV 2021













































































































































































































































































































Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands

Mercedes-Benz EQV 2021, Owner'S Manual

Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands