Mercedes-Benz EQV 2021 Owner'S Manual Download Page 200

Page: 200 / 300

Parking service

NOTE Damage to the vehicle due to not

observing the maximum permitted head-

room clearance

If the vehicle height is greater than the maxi-

mum permitted headroom clearance, the roof

and other parts of the vehicle may be dam-

aged.

Observe the signposted headroom clear-

ance.

If the vehicle height is greater than the

permitted headroom clearance, do not

enter.

Observe the changed vehicle height with

add-on roof equipment.

NOTE Before selecting the parking option

The data is based on information provided by

the respective service provider.
Mercedes Benz accepts no liability for the

accuracy of the information provided relating

to the multi-storey car park/parking area.

Always observe the local Information and

conditions.

This service is not available in all countries.

Tap on

on the map.

Select a parking option.

The map shows the parking options in the

vicinity.
The following information is displayed (if availa-
ble):

Destination address, distance from current

vehicle position and arrival time

Information on the multi-storey car

park/car park, for example:

Opening times

Parking charges

Current occupancy

Maximum parking time

Maximum clearance height
The maximum clearance height shown

by the parking service does not replace

the need for observation of the actual

circumstances.

Available payment options (Mercedes pay,

coins, bank notes, cards)

Details on parking tariffs

Number of available parking spaces

Payment method (e.g. at parking meters)

Services/facilities at the parking option

Telephone number

Mercedes PRO connect

Telephony

▌

Notes on telephony

WARNING Risk of distraction from operat-

ing integrated communication equipment

while the vehicle is in motion

If you operate communication equipment inte-

grated in the vehicle when driving, you could

be distracted from the traffic situation. This

could also cause you to lose control of the

vehicle.

Only operate this equipment when the

traffic situation permits.

If you cannot be sure of this, stop the

vehicle whilst paying attention to road

and traffic conditions and operate the

equipment with the vehicle stationary.

WARNING Risk of an accident from oper-

ating mobile communication equipment

while the vehicle is in motion

Mobile communications devices distract the

driver from the traffic situation. This could also

cause the driver to lose control of the vehicle.

As the driver, only operate mobile com-

munications devices when the vehicle is

stationary.

As a vehicle occupant, only use mobile

communications devices in the areas

intended for this purpose, e.g. in the rear

passenger compartment.

You must observe the legal requirements for the

country in which you are currently driving when

operating mobile communication equipment in the

vehicle.
Bluetooth

connection:

The menu view and the available functions in the

phone menu are partly dependent on the Blue-
tooth

profile of the mobile phone connected.

198 MBUX multimedia system

T447 0414 02

Summary of Contents for EQV 2021













































































































































































































































































































Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands

Mercedes-Benz EQV 2021, Owner'S Manual

Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands