Mercedes-Benz EQV 2021, Owner'S Manual

Page: 182 / 300

#
Use the
:
or
9
button to scroll through
the names.
If you press and hold the button for longer than
one second, the names in the telephone book
will be displayed quickly one after the other.
or
#
Press and hold the
:
or
9
button for
longer than five seconds.
Rapid scrolling – the name that starts with the
next letter or the previous letter in the alphabet
is displayed.
Rapid scrolling will stop when you release the
button or reach the end of the list.
#
If only one telephone number has been saved
for a name: press the
6
or
a
button to
start dialling.
or
#
If several telephone numbers have been saved
for a name: press the
6
or
a
button to
display the telephone numbers.
#
Use the
:
or
9
button to select the
telephone number.
#
Press the
6
or
a
button to start dial-
ling.
#
To exit the telephone book: press the
~
or
%
button.
Using redial
#
Press the
6
button to switch to the redial
memory.
#
Use the
:
or
9
button to select the
name or telephone number.
#
Press the
6
or
a
button to start dial-
ling.
#
To exit the redial memory: press the
~
or
%
button.
Settings menu
#
Press the
ò
button to call up the list of
menus.
#
Use the
:
or
9
button to select the
Settings menu.
#
Press the
a
button to confirm.
You have the following options on the
Settings
menu:
R
Changing the settings for the driver assistance
systems on the Assistance submenu
R
Changing the settings for the exterior lighting
on the Lights submenu
R
Changing the display options on the Instrument
cluster submenu
R
Resetting the settings to factory settings
#
Select the desired submenu and confirm your
selection.
Assistance submenu
#
Select a driving or driver assistance system
and configure a setting.
R
Switching ESP
®
on/off ( / page 150).
R
Switching Traffic Sign Assist on/off
(
/
page 167).
R
Switching Active Brake Assist on/off
(
/
page 152).
R
Switching Blind Spot Assist on/off
( / page 168)
R
Adjusting ATTENTION ASSIST
( / page 166).
R
Setting Lane Keeping Assist
(
/
page 169).
Lights submenu
The following settings are possible on the Lights
submenu:
R
Switching the Intelligent Light System on/off
(
/
page 107)
R
Switching between low beam for right- and left-
side traffic (in vehicles with Intelligent Light
System only)
#
Use the
:
or
9
button to select the
Lights submenu.
#
Press the
a
button to confirm.
#
To switch between low beam for right- and left-
side traffic: use the
:
or
9
button to
select Dipped beams Setting for .
The display will show the selected setting.
#
Change the selected setting with the
a
but-
ton.
When you change the setting, the switchover
will not take place until the next time the vehi-
cle is stationary.
When you switch over the low beam for right- or
left-side traffic, motorway mode and the enhanced
fog light function may not be available. This deacti-
vation will take place only if the setting for driving
on the right or left is the opposite to your vehicle's
national version.
180 Instrument cluster and on-board computer
T447 0414 02