Mercedes-Benz EQS 2021, Operator'S Manual

Page: 647 / 928

+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre-
sponsible disposal
Tyre sealant contains pollutants.
#
Have the tyre sealant bottle disposed of
professionally, e.g. at a Mercedes-Benz
Service Centre.
#
Stow the tyre sealant bottle and the tyre infla-
tion compressor.
#
Pull away immediately.
#
Stop driving after approximately ten minutes
and check the tyre pressure using the tyre
inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
&
WARNING Risk of accident due to the
specified tyre pressure not being attained
If the specified tyre pressure is not reached,
the tyre is too badly damaged. The tyre seal-
ant cannot repair the tyre in this instance.
The braking and driving characteristics may be
greatly impaired.
#
Do not continue driving.
#
Consult a qualified specialist workshop.
Countries that have Mercedes-Benz Service24h:
you will find a sticker with the telephone number,
e.g. on the B‑pillar on the driver's side.
#
Correct the tyre pressure if it is still at least
130 kPa (1.3 bar/19 psi). See the tyre pres-
sure table on the socket flap for values.
#
To increase the tyre pressure: switch on the
tyre inflation compressor.
#
To reduce the tyre pressure: press pressure
release button
1
next to manometer
2
.
#
When the tyre pressure is correct, unscrew
the filling hose from the valve of the sealed
tyre.
#
Screw the valve cap onto the valve of the
sealed tyre.
#
Pull the tyre sealant bottle out of the tyre infla-
tion compressor.
The filling hose stays on the tyre sealant bot-
tle.
#
Drive to the nearest qualified specialist work-
shop and have the tyre, tyre sealant bottle and
filling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
&
WARNING Risk of explosion due to elec-
trostatic charge
Electrostatic charge can ignite the highly
explosive gas mixture in the battery.
Breakdown assistance 645
ohne