Mercedes-Benz EQS 2021, Operator'S Manual

Page: 236 / 928

Control panel in the rear passenger compartment
1
p
Reading lamp on the respective side of
the vehicle
2
u
Rear interior lighting
#
To switch reading lamps on: press button
1
.
The reading lamp, the interior lighting above
the rear door and the dome lamp on the
respective side of the vehicle will light up.
#
To switch reading lamps off: press button 1
once or twice.
After pressing it once, the interior lighting
above the rear door and the dome lamp on the
respective side of the vehicle will go out.
After pressing it twice, the reading lamp on
the respective side of the vehicle will go out.
#
To switch the rear interior lighting on/off:
press button 2 .
The reading lamps, the interior lighting above
the rear door and the dome lamps on both
sides of the vehicle will light up or go out.
Adjusting the ambient lighting
Multimedia system:
4
©
5
Settings
5
Comfort
5
Ambient lighting
Setting the colour
#
Select Colour .
#
Select Monochrome or Multi-colour .
#
Set the desired colour or colour scheme.
Energy Shine
R
The interactive Energy Shine colour world
shows the different phases during the journey.
Depending on the type of driving condition
(speed, boost effect or recuperation), this is
shown in colour by the active ambient lighting.
Adjusting the brightness
#
Select Brightness .
#
Adjust the brightness.
%
Depending on the ambient light conditions,
the ambient lighting will automatically switch
between day and night modes.
Activating the brightness for zones
#
Select Brightness .
#
Switch off Link zones .
The Direct , Indirect and Accents zones can be
set separately.
% The Light strip zone can also be set in vehi-
cles with active ambient lighting.
Activating effects
&
WARNING Risk of an accident despite
activated effects of ambient lighting and
active ambient lighting
To use the Warning Assistance effects, the
respective functions must be activated in the
driver assist menu.
234 Light and sight
ohne