#
To select the variable limiter: select
È
with
the right rocker switch.
%
Vehicles with Active Distance Assist
DISTRONIC: the variable limiter is selected by
a different button (
/
page 243).
Activating cruise control or the variable limiter
#
Press rocker
1
switch
M
up or
N
down.
The current vehicle speed is stored and the
vehicle maintains this speed (cruise control) or
does not exceed it (variable limiter).
or
#
Select
J
with the left rocker switch.
The last stored speed is called up and the
vehicle maintains this speed (cruise control) or
does not exceed it (variable limiter).
If the last stored speed has previously been
deleted, the current vehicle speed is stored.
%
When you switch off the vehicle, the last
speed stored is deleted.
When you activate cruise control or Active
Distance Assist DISTRONIC, the last speed
stored for the variable limiter is deleted.
Increasing/decreasing the stored speed
#
1 km/h: press rocker switch
1
up
M
or
down
N
to the pressure point, or press and
hold (increments of1 km/h).
or
#
10 km/h: press rocker switch
1
up
M
or
down
N
beyond the pressure point, or
press and hold (increments of10 km/h).
or
#
Accelerate the vehicle to the desired speed
and press rocker switch
1
up
M
.
Adopting a detected speed
#
Activate cruise control or the variable limiter.
#
If a traffic sign has been detected and is dis-
played in the instrument cluster: select
J
with the left rocker switch.
The maximum permissible speed shown by the
traffic sign is stored and the vehicle maintains
or does not exceed this speed.
Deactivating cruise control or the variable limiter
#
Select
O
with the left rocker switch.
%
If you brake, deactivate ESP
®
or if ESP
®
inter-
venes, cruise control is deactivated. The varia-
ble limiter is not deactivated.
Information on the permanent limiter
If the vehicle should never exceed a specific
speed (e.g. for driving in winter tyre mode), you
can set this speed with the permanent limiter.
You do this by limiting the speed between
160 km/h and 240 km/h in the multimedia sys-
tem (
/
page 241).
Shortly before the set speed is reached, it
appears in the Instrument Display. When you con-
firm the message, display messages no longer
appear until you switch off the vehicle. The speed
will only be displayed again once the vehicle has
been restarted or if the set speed is changed.
The permanent limiter does not switch to passive
mode even during kickdown and the driven speed
remains below the set speed.
240 Driving and parking
Summary of Contents for EQA 2022
