Mercedes-Benz EQA 2022, Owner'S Manual

Page: 215 / 541

Status of the
charging
process 2
Display Meaning
#
Lights up
orange
Interruption in
charging
#
Lights up
green
Charging
process com-
pleted
#
Flashes red
(for approx.
90 s)
Vehicle mal-
function;
charging is
not possible
Starting the alternating current charging process
(mode 2/3)
&
DANGER Risk of death when charging at a
damaged socket
The charging process uses high voltage.
If the charging cable, the vehicle socket or the
mains socket are damaged, you could receive
an electric shock.
#
Only use an undamaged charging cable.
#
Avoid mechanical damage such as crush-
ing, abrading or driving over the cable.
#
Have a damaged vehicle socket replaced
at a qualified specialist workshop as
soon as possible.
#
Never connect the charging cable to a
damaged vehicle socket.
*
NOTE Damage due to overheating of
charging cable and charging cable con-
nector
During the charging process, the charging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are influenced by
the following factors:
R
the power supply system and the charging
cable are not damaged
R
the instructions for handling the charging
cable and the control element on the
charging cable have been observed
#
If the charging cable or charging cable
connector becomes too hot, have the
power supply system checked.
*
NOTE Damaged or dirty vehicle socket
when the socket flap is open
#
Always keep the socket cover and the
socket flap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
#
Make sure that the socket cover is
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
212 Driving and parking