Mercedes-Benz EQA 2022, Owner'S Manual

Page: 156 / 541

#
To remove: turn cover
1
to the left and
remove it from the wheel arch liner.
#
To fit: insert cover 1 into the wheel arch liner
and turn it to the right until it engages.
Replacing illuminants in the halogen headlamp
Requirements:
R
Low beam: an H7 55 W illuminant is available.
R
High beam: an H7 55 W illuminant is available.
1 Low beam housing cover
2 High beam housing cover
#
Switch the lighting system off.
#
Remove the cover in the front wheel arch
(
/
page 152).
#
Turn the relevant housing cover anti-clockwise
and remove it.
#
Turn the socket anti-clockwise and remove it.
#
Pull the illuminant out of the socket.
#
Insert the new illuminant into the socket such
that the entire base of the illuminant is resting
on the bottom of the socket.
#
Insert the socket and turn it clockwise.
#
Position the housing cover and turn it clock-
wise.
#
Replace the cover in the front wheel arch
(
/
page 152).
Changing the rear bulbs (vehicles with halogen
headlamps)
Replacing the tail lamp illuminants
#
Due to their locations, have the illuminants for
the turn signal light and reversing light
changed at a qualified specialist workshop.
Windscreen wipers and windscreen washer sys-
tem
Switching the windscreen wipers on/off
1 g
Windscreen wipers off
2 Ä
Automatic wiping, normal
3 Å
Automatic wiping, frequent
Light and sight 153