Mercedes-Benz EQA 2022, Owner'S Manual

Page: 147 / 541

#
Turn the headlamp range adjuster to the posi-
tion that corresponds to the load condition of
your vehicle.
Operating the combination switch for the lights
1 High beam
2 Turn signal light, right
3
Headlamp flashing
4 Turn signal light, left
#
Use the combination switch to select the
desired function.
Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow 1 .
When the high beam is activated, the indicator
lamp for low beam
L
will be deactivated
and replaced by the indicator lamp for high
beam
K
.
Switching off high beam
#
Push the combination switch in the direction
of arrow 1 or pull it in the direction of arrow
3 .
Headlamp flashing
#
Pull the combination switch in the direction of
arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow
2
or
4
.
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combina-
tion switch beyond the point of resistance in
the direction of arrow 2 or 4 .
144 Light and sight