Mercedes-Benz EQA 2022, Owner'S Manual

Page: 131 / 541

#
Fold the corresponding seat backrest 1 back
until it engages.
Left and right seat backrests: if the seat back-
rest is not engaged and locked in place, the
red lock verification indicator 2 will be visi-
ble.
Centre seat backrest: if the seat backrest is
not engaged and locked in place, the red lock
verification indicator 3 will be visible.
Locking the release catch of the centre rear seat
backrest
Requirements:
R
The left and centre seat backrests are
engaged and joined together.
You can lock the centre seat backrest. The centre
seat backrest can then be folded forwards only
together with the left seat backrest.
#
Fold the centre and left seat backrests for-
wards.
#
To lock or unlock: slide catch 1 upwards or
downwards.
Adjusting the angle of the rear seat backrests
&
WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest may fold forwards, even while the vehicle
is in motion.
R
As a result, the vehicle occupant will be
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
R
Objects or loads in the boot or load com-
partment cannot be restrained by the seat
backrest.
#
Make sure that the rear bench seat, the
rear seat and the seat backrest are
engaged before every trip.
128 Seats and stowing