Mercedes-Benz E 300, Owner'S Manual

Page: 107 / 465

#
Lift up socket cap 1 .
#
Insert the plug of the device.
If you have connected a device to the 12 V
socket, leave the cover of the stowage compart‐
ment open.
Using the 12 V socket in the rear
Requirement:
R
Only connect devices up to a maximum of
180 watts (15 A).
#
Pull cover 2 out by its top handle edge.
#
Remove plug 1 from the socket and insert
the plug of the device.
Using the 230 V socket in the rear compart‐
ment
& DANGER Risk of fatal injury due to dam‐
aged connecting cables or sockets
When a suitable device is connected, the
230 V power socket will be carrying a high
voltage. You could receive an electric shock
if the connecting cable or the 230 V power
socket is pulled out of the trim or is damaged
or wet.
#
Use only connecting cables that are dry
and free of damage.
#
When the ignition is switched off, make
sure that the 230 V power socket is dry.
#
Immediately have the 230 V power
socket checked or replaced at a quali‐
fied specialised workshop if it is dam‐
aged or has been pulled out of the trim.
#
Never plug the connecting cable into a
230 V power socket that is damaged or
has been pulled out of the trim.
&
DANGER Risk of fatal injury due to incor‐
rect handling of the socket
You could receive an electric shock:
R
if you reach into the socket.
R
if you insert unsuitable devices or objects
into the socket.
#
Only connect suitable devices to the
socket.
104 Seats and stowing