Mercedes-Benz Conecto Manual Download

Page: 66 / 268

Operation

Opening the hinged window

Note:

“Wheelchair” symbol (B) goes out after
the door has closed.

Note:

Ramp movement is interrupted if the
ramp platform is subjected to load dur-
ing ramp operation.

M54_00-1355-71

The following is shown on the screen:
“Ramp in operation” (D), the arrow
indicates that the ramp is in motion.

The ramp indicator lamp in the in-
strument cluster goes out.

The “Ramp extended” indication dis-
play (D) on the screen goes out.

Opening the hinged window

M67.00-0012-01

Open the window inwards using the
handle.

Air circulates in the passenger com-
partment without the need for a fan
when the hinged windows and roof
hatches are open.

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands