Mercedes-Benz Conecto Manual Download

Page: 65 / 268

Operation

Retracting/extending the ramp

M54_00-1355-71

The following is shown on the screen:
“Ramp in operation” (D), the arrow
indicates that the ramp is in motion.

Danger.

Risk of entrapment: Make sure that per-
sons or objects are not between the bus
body and road surface.

Caution:

The ramp retracts if it strikes an obstacle.
In this event, manual intervention is ne-
cessary to resume ramp operation.

Note:

“Wheelchair” symbol (B) is displayed when
the ramp has been requested.

M54_00-1356-71tif

Ramp fully extended.

Note:

The door can be opened.

M54_00-1354-71

Door open

Retracting the ramp

Note:

The ramp retracts automatically after the
door has closed.

CONECTO (C628.3--)/08.2007 GB

Summary of Contents for Conecto













































































































































































































































































Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands

Mercedes-Benz Conecto, Manual

Search results

Summary of Contents for Conecto

Reviews:

Related manuals for Conecto

Brands by name

Popular brands