Mercedes-Benz Conecto, Manual

Page: 40 / 268

Operation
Brake system operating/malfunction displays
Brake pad wear
M54_00-1163-01
If the brake pads/linings are too worn,
this is indicated on the screen by a ser-
vice message and a yellow warning level
malfunction message.
Danger.
The braking characteristics of the bus
may change if a yellow warning level mal-
function in the brake system is displayed
on the screen in the instrument cluster.
Drive with extreme care. Have the mal-
function rectified as soon as possible by
an EvoBus Service Partner.
Brake pad wear indicator
electronics
This icon and a yellow warning level mal-
function are displayed if the connection
to the electronics system (control unit)
of the brake pad wear indicator is mal-
functioning or not available.
Brake pad wear sensor fault (2-axle
bus)
This icon appears on the display screen
in conjunction with a yellow warning
level malfunction if the brake pad wear
sensor has a fault.
Note:
If the icon does not go out even if you
switch the ignition off and on again, have
the malfunction rectified by an EvoBus
Service Partner.
Note:
Example of an icon for a fault on the
right-hand side of the driven axle on a
2-axle bus.
30
CONECTO (C628.3--)/08.2007 GB